Siddhi Vinayak Trading Co.

An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.

 

Properties:

• High bonding strength.
• Suitable for use on vertical surfaces as it will not drip or slump.
• It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.

 

Applications Area:

• It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required.
• Suitable for MDF, wood, chip wood, rubber, most plastics, leather and other common substrates.
• Especially suitable for the applications where cure speed needs to be accelerated.
• Although Akfix 705 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.

Additional Information:

• Item Code: 705

Akfix 610 is a single component, fast curing polyurethane based adhesive. It combines high bond strength with fast curing. The water resistance property makes it exceptionally good at bonding wooden surfaces where water splash and moisture is an issue.

Featires & Benefits:

• Fast curing, low press time.
• Conforms to D4 according to DIN EN 204.
• Transparent.
• Extremely high bond strength on wooden substrates.
• Thixotropic, non-sag, ideal for vertical joints.
• Low consumption, economical.
• Usable on slightly wet substrates.
• Very good resistance to chemicals.
• Excellent resistance to moisture and weather conditions.
• Good filling properties.
• Non-shrinking.
• Low odor.

Applications:

• It is suitable for use in construction and repair applications where a permanent strong bond is required between porous-porous and porous-nonporous surfaces.
• Bonding wooden surfaces at bathroom, kitchens, decks etc. where there is a constant moisture and water contact risk.
• It can be used for bonding various kinds of construction materials such as wood, MDF, concrete, metal, polystyrene and polyurethane foam, marble, granite and ceramic etc.

Instructions:

• The substrates must be dry clean, free of dust and grease.
• The application temperature should be between 5 C and 35 C.
• Moistening the substrates slightly will provide stronger adhesion.
• Adhesive should be applied to only one side in straight or wave-like form within 2 minutes.
• Mechanical fasteners must be used to keep the materials together (15-20 min.) until the adhesive cures totally.
• Fresh adhesive can be cleaned with acetone.

Standards:

• Meets or exceeds the requirements of the following specifications:
• D4 classification according to DIN EN 204.
• Tested according to DIN EN 14257 (WATT 91).

Restrictions:

• Storage above 35 0C may shorten the shelf life
• Not suitable for polyethylene, polypropylene, nylon, ABS, PTFE
• Should be tested before application for specific substrates

Storage and Shelf Life:

• 12 months between 5 C and 25 C in closed original packaging.

Safety & Disposal:
Contains Diphenylmethane-4,4 di-isocyanate. Corrosive and irritating to eyes, skin and lungs. Harmful if swallowed. Wear chemical resistant gloves and eye protection when in contact. Keep container tightly closed when not in use. Prevent spillages.

APPLICATIONS 

In construction, restoration, repair and decoration works,

 With wide range of porous and non-porous material like wood, plywood, concrete, brick, PVC, granite, marble, polycarbonate, metal, ceramic etc.

 Also good for mounting isolation, decorative polystyrene and wall panels

Akfix 647FC is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, wood etc.

STORAGE AND SHELF LIFE  9 months if stored in its original package, away from direct sunlight and moisture, between +10 ⁰C and +25 ⁰C  

 APPLICATION AREAS
 Body construction of cars, containers, caravans etc.
 Sealing and bonding of ventilation ducts, gutters and spouts etc.
 Sealing of sheet metal seams
 For vibration reduction in all type of sheet metal assembly works
 Sealing against water, air, gas and dust.

Additional Information:

• Item Code: 32141000
• Packaging Details: 12 pcs Box

MS High Tack Ast Polymer

 

AST polymer-based, one component, high quality and professional adhesive with high adhesive strength and initial tack. It is suitable for bonding heavy building materials without the use of clamps and/or fixing tape.

Properties

• High initial tack.
• Eco-friendly, free from isocyanate, solvent, acids and halogens.
• Excellent primerless adhesion to numerous porous and non-porous substrates.
• Excellent elasticity, no bubble formation, waterproof, no shrinkage, over-paintable.
  • It is specially developed as a universal adhesive for bonding various building
    materials.
  • It is suitable for elastic bonding of panels, profiles and other pieces on the most common substrates such as: stone, concrete, mirrors, glass, plasterboard, PU, PVC, polyester, plastics, enamel, ceramic, copper,
    lead, zinc, aluminium, metals, R.V.S., wood, HPL and cement fibre panels etc.
  • Common application areas are: Wall cladding elements and ceiling panels.
  • Sound isolation panels (mineral wool, wood-wool cement & plastic foams).
  • Thermal isolation panels (PUR, PIR, PS). Casings and frames in building construction.
  • Wooden and plastic laths, ornaments and frames.
  • Doorsteps, window sills, skirting boards and cover plates.
  • Complete construction elements (such as roofing and facade elements) in frames.
Application Areas